Buying guide: The truth about thread count
Is there anything better than sliding into a bed laden with good quality sheets? At the end of the day, I can't wait to stretch out under my fresh, soft covers and nestle my face into a good cotton-covered pillow. We spend a third of our lives in bed so quality sheets are key, but how do you get quality for your money? There's no doubt that most consumers believe the higher the thread count, the better the quality, but this isn't entirely true. With the help and expertise of Joanna Goodman, owner of Au Lit Fine Linens, we expose the truth about thread count and what it takes to find quality bed sheets.
What is thread count, really?
Simply put, thread count is the number of threads woven into one square inch of fabric. This number is based on the threads woven horizontally ("weft") and vertically ("warp"). Extra threads can also be woven into the weft threads to increase the thread count. These added threads are called "picks" and are added in the overall count, which is how some sheets end up having thread counts in the thousands. This is why the idea that high counts equal better quality isn't really accurate. Consider this: Joanna says most weavers will say the maximum number of threads that can be woven into one square inch of fabric is 500 to 600. Though the number is arguable and, according to Joanna, "depends on the mill you deal with," it gives you an idea of where the line is between single-ply, unpicked weaves and ones that add threads here and there to bump up the count.
What to look for when buying sheets
Joanna lists three things to look for on the label: if it's Egyptian cotton, where it's woven and, lastly, the thread count. While thread count is a bit misunderstood, the buzz around Egyptian cotton is true. "The very best cotton in the world is grown in Egypt. So Egyptian cotton will be of a better quality," Joanna says. She also recommends pima cotton, which is grown in America, "though not quite as exceptional as Egyptian." When it comes to weaving, however, she swears by the Italians as being the "master weavers of the world" due to their "long tradition of weaving" and use of the best Egyptian cotton. Be sure the label says 100% or pure Egyptian cotton though, otherwise it may only contain a small percentage of the good stuff. As for the thread count, look for a minimum of 200. From there, it's all about preference!
What to avoid when buying sheets
Joanna's one key piece of advice is to watch out for extremely low priced, high thread count sheet sets. A complete sheet set with a high thread count for $100 or less is probably not the dream bargain you think it is. As Joanna believes, "you always get what you pay for." The price tag for bed linens will vary depending on the sheet size and what items you're buying, such as a duvet cover, sheet sets, or pillowcases. "A superior quality 200 thread count queen set (including flat, fitted, two pillowcases), made of Egyptian cotton and woven in Europe, could retail reasonably for about $150-$250," says Joanna.
What do you prefer?
After going through the quality checklist, go with what feels best for you. If you're looking for a durable linen, Joanna recommends any percale from thread count 200 to 800. Percale is any cotton woven with a 200 thread count or higher and will be more durable than a cotton satin of the same thread count. It's also less likely to pill than cotton satin because it has a denser weave. Love the feel of a cotton button down shirt? Joanna advises a crisp, dense 200 thread count percale. Prefer a silkier sheet? Go for a 300 to 600 cotton satin. If you want lighter sheets, Joanna says, a 400 thread count sheet can be soft and light, while an 800 percale would be soft and dense. The higher the thread count, the more likely multiple-ply thread is used or picks are added, making the fabric denser and heavier.
Now you know that quality is not just about the number, so don't let numbers rule your bed! Remember what to look for on the label and be wary of too-low prices for supposedly high quality items. Beyond that, go with what you prefer. Get a good feel of the sheets before buying. Whether you're unzipping the packaging or lying down on a display bed, make sure the fabric feels good against your skin and soon you'll be having sweet dreams!
Find out how to keep your new linens crisp and clean with our tips to whiter-than-white sheets.
Learn to renovate your basement the right way.
Contractor and TV star Bryan Baeumler offers tips on how to renovate your basement properly and save money long term.
Finished basements have become more popular over the past few decades. No longer are they viewed as dark caves where mechanical systems clank away and spiders abound. Instead, they offer additional space and can increase the value of your home - as long as you keep a few simple things in mind.
Photography by Michael Graydon
1 Bedroom addition
Incorporating a bedroom in the basement is a great way to make room for guest and create extra storage space. But it also means making sure there’s a legal egress in case of fire - typically a window with an opening big enough to allow escape, as well as a window well deep enough to facilitate that hasty exit. And yes, you’ll need permits. $2000 to $3000 for window supply and installation.
2 Wall insulation
A basement’s outside walls often aren’t well insulated, so opt for spray foam or rigid insulation. You’ll spend a few extra dollars but it will pay of in the long run, since your furnace won’t need to work as hard to heat up your home. $3000 to $4000 to insulate a standard basement.
3 Subfloor solution
The days of damp floors and cold feet are over. I’m a big fan of dricore subfloor panels because they provide a ready-to-use foundation for installing the finished floor. You can frame and fasten your walls on top of the subfloor with ease, which maintains a thermal break and air gap between the concrete and top layers of flooring. It also raises the room’s temperature. $2 per sq. ft.
Photography by Mark Burstyn
4 Bathroom addition
Building a bathroom in the basement will add value to your home, as long as it’s well planned. Good news: Most new homes have basement bathroom rough-ins already installed. Have you ever wondered what those random capped pipes are that stick out from the concrete? Now you know! If yours doesn’t, a plumber will need to open up a channel from the bathroom area all the way to the main stack or sewer line. $3000 to $5000 for rough-ins.
Learn how to style your open-concept space.
Learn how to decorate your open-concept space with these helpful tips and tricks.
The 1,100-square-foot main floor of this Vancouver family home boasting a modern beach house look has a lot going for it, namely all the light. The large open-concept space consisting of a kitchen, living area and dining room is flooded with natural light thanks to five skylights and plenty of windows. “It’s so bright, even in the grey West Coast winter,” says one of the homeowners. But such a spacious undefined layout doesn’t come without its challenges – when a great room is too great for its own good, how does one make it cozy and livable? The homeowners worked closely with architect Jonathan Katz of J+R Katz Design & Architecture and designer Melanie Finkleman of Hazel + Brown Design Company to come up with a design that accomplishes just that. Here are eight ways they made this open floor plan shine.
1 Paint everything one shade: Sticking with one paint colour throughout an open-concept space prevents a disjointed appearance. On the main floor, designer Melanie Finkleman selected the same crisp white for the walls, ceiling, trim and cabinetry. The result is a bright envelope that emphasizes the home’s light-filled modernity.
2 Use uniform materials: It’s not only paint colour that will provide a cohesive look. Design elements like flooring, cabinetry, trim and fabric should also coordinate. In this house, the driftwood-look oak floors run throughout the space, and the grey Caesarstone countertops in the kitchen complement the concrete-topped coffee table in the living area.
3 Keep it casual: Open-concept living marries well with a laid-back lifestyle. This family-friendly home has nothing too precious or breakable and boasts plenty of hard-wearing choices, such as hardwood floors and leather chairs.
4 Define separate areas: Large open spaces can feel cavernous if specific zones aren’t demarcated according to their function. Here, the furniture arrangement defines the living area, while the Caesarstone-topped island delineates the kitchen.
5 Decorate with texture: In an expansive monochromatic room, texture is key. “The ceiling-height brick fireplace and the geometry of the built-in shelving unit add visual interest without distracting from the minimal aesthetic,” says Melanie.
6 Keep the aesthetic consistent: “Since the kitchen is visible from every angle, we used simple materials – matte grey Caesarstone for the countertops and grey back-painted glass for the backsplash – so it would seamlessly integrate with the rest of the space,” says Melanie. Such a neutral backdrop means the look is consistent when viewed from any area on the main floor. “It’s calming because your eye doesn’t bounce around too much.”
7 Choose simple window treatments: Barely-there white roller shades control light and offer privacy. “They block out the southern glare while maintaining the airy feel of the space,” says Melanie.
8 Include ample closed storage: No matter how much we all strive to live minimally, having some stuff is inevitable. “We were realistic about wanting to hide visual clutter in the kitchen since it’s so connected to the living area,” says Melanie. Plenty of closed cabinetry means everyday dishes, small appliances and various odds and ends are out of sight, giving the entire space a tidy appearance and allowing the pops of colour in the living area to shine.
Real estate: Move or improve?
Is it time to move or simply improve your home? Consider these factors before packing up those boxes.