Homes

Home renovation tips from Bryan Baeumler of
Structural components, wiring and drywalling Bryan Baeumler, a Toronto contractor and host of the HGTV program Disaster DIY, has seen his share of home renovation disasters perpetrated by well-meaning but naive homeowners. Over the last two seasons, he's documented some often inadvertently hilarious home renovation whoppers, and in each case, helped the homeowners solve their problems in creative and intelligent ways. We sat down with Bryan recently and asked him to describe the five most common home renovation DIY blunders he sees, and offer advice on how to do it right. Here's what he had to say.    Bryan Baeumler's home renovation tip #1: Cutting into structural components. "A lot of people don't see how the weight of a house travels down from the roof through load-bearing walls to the foundation. If you interrupt that weight distribution, you can weaken the house, or even cause it to fall down." His advice: along with the all-important building permit, have an architect or structural engineer look at your plans before you start your home renovation. There are usually several alternatives that will maintain the structure safely.Bryan Baeumler's home renovation tip #2: Do-it-yourself wiring. Laypeople should never mess with the electrical components of a home during a home renovation. Just a few of the more common mistakes are not grounding wires properly, mixing aluminum with copper wiring (which causes oxidization and failure) or simply wiring things wrong. The stakes are high: faulty wiring can burn your house down or even electrocute someone. Unless you are fully trained in electrical work, call in a pro for your lighting.Bryan Baeumler's home renovation tip #3: Ill-informed drywalling. Drywall is one job an enterprising homeowner can tackle safely and is therefore a popular home renovation project, but making sure you use the right materials and methods can make a big difference in the process and the look of the finished job. Many DIYers use standard mud to tape the seams, slather on too much, and then spend hours sanding and sanding. It's much more efficient to start with a thin layer of a quick-dry compound, which dries in about 90 minutes, then cover with two or three light coats of a lighter compound, drying and sanding between each coat. Finally, go over the seams with a damp sponge to remove all traces of sanding dust before you paint. Plumbing and budget planning Bryan Baeumler's home renovation tip #4: Rube Goldberg plumbing. True, a bad plumbing job may not be as dangerous as faulty wiring, but a leak in an upper floor can cause a tremendous amount of damage, and if it's inside the walls, you might not even see it until it's too late. Plumbing looks straightforward, but there are many little tricks of the trade that an amateur might not know about. This is another job that should, in most cases, be left to the pros. Click here for bathroom renovation tipsBryan Baeumler's home renovation tip #5: Not planning, budgeting or scheduling the home renovation job properly. Baeumler says one of the best time and money savers in any home renovation is sitting down beforehand and working out a realistic plan of what you're going to do. Start with a realistic budget, and allow another 10-15% contingency fund for the unforeseen (and there is always, says Baeumler, something unforeseen). Once you have your budget, create detailed plans or drawings; when you have a plan on paper, it's easier to stick to it -- and stick to your budget in the process. Next, map out a schedule that accounts for each step of the project. And above all, he says, be prepared to adjust all of these things -- budget, plans, and schedule -- as you go along. Every renovation, just like every home -- and so far, every enterprising DIYer Baeumler has met -- presents a unique and completely different set of challenges.Find out how to make your bathroom eco-friendly herefunction fbs_click() {u=location.href;t=document.title;window.open('http://www.facebook.com/sharer.php?u='+encodeURIComponent(u)+'&t='+encodeURIComponent(t),'sharer','toolbar=0,status=0,width=626,height=436');return false;} html .fb_share_link { padding:2px 0 0 20px; height:16px; background:url(http://static.ak.facebook.com/images/share/facebook_share_icon.gif?51:26981) no-repeat top left; }Share on FacebookImage of Bryan Baeumler courtesy of HGTV

©

Credit
Martha Uniacke Breen

Home renovation tips from Bryan Baeumler

E-mail It

Home renovation tips from Bryan Baeumler

Send to a friend

* marked fields are required.

Bryan Bryan Baeumler, host of the HGTV program Disaster DIY, helps make your home renovation go smoothly and gives home renovation tips on fixing those DIY mishaps.

Bryan Baeumler, a Toronto contractor and host of the HGTV program Disaster DIY, has seen his share of home renovation disasters perpetrated by well-meaning but naive homeowners. Over the last two seasons, he's documented some often inadvertently hilarious home renovation whoppers, and in each case, helped the homeowners solve their problems in creative and intelligent ways. We sat down with Bryan recently and asked him to describe the five most common home renovation DIY blunders he sees, and offer advice on how to do it right. Here's what he had to say.
    
Bryan Baeumler's home renovation tip #1: Cutting into structural components. "A lot of people don't see how the weight of a house travels down from the roof through load-bearing walls to the foundation. If you interrupt that weight distribution, you can weaken the house, or even cause it to fall down." His advice: along with the all-important building permit, have an architect or structural engineer look at your plans before you start your home renovation. There are usually several alternatives that will maintain the structure safely.

Bryan Baeumler's home renovation tip #2: Do-it-yourself wiring. Laypeople should never mess with the electrical components of a home during a home renovation. Just a few of the more common mistakes are not grounding wires properly, mixing aluminum with copper wiring (which causes oxidization and failure) or simply wiring things wrong. The stakes are high: faulty wiring can burn your house down or even electrocute someone. Unless you are fully trained in electrical work, call in a pro for your lighting.

Bryan Baeumler's home renovation tip #3: Ill-informed drywalling. Drywall is one job an enterprising homeowner can tackle safely and is therefore a popular home renovation project, but making sure you use the right materials and methods can make a big difference in the process and the look of the finished job. Many DIYers use standard mud to tape the seams, slather on too much, and then spend hours sanding and sanding. It's much more efficient to start with a thin layer of a quick-dry compound, which dries in about 90 minutes, then cover with two or three light coats of a lighter compound, drying and sanding between each coat. Finally, go over the seams with a damp sponge to remove all traces of sanding dust before you paint.

0 Comments

Leave a Comment
Leave a comment

My Style At Home network

  • Login to account

    Login

  • Sign Up

    Sign up now to receive exclusive access to the My Home & Garden network!

Sign up for the StyleAtHome E-Newsletter

Get free decorating and design tips delivered straight to your in-box! You’ll also receive recipes, entertaining advice, and contest notifications for your chance to win fabulous prizes. Sign up now to get all this and more!

E-MAIL ADDRESS

Contests

Latest Contests

more contests